QPSK DEMODULATOR QUAD (DVB-S2) CW-4871/2-S2, CW-4971/2-S2, CW-4871-S2S, CW-4872-S2S

QPSK Demodulator QUAD CI Front
QPSK Demodulator QUAD CI FrontQPSK Demodulator QUAD FTA Front

Product Details

8PSK DEMODULATOR QUAD is not available anymore. It is substituted for DVB-S/S2 Satellite Receiver CW-4611, CW-4612, CW-4621, CW-4622.

 

The 8PSK Demodulator Quad comprises four independent DVB-S2 receiver with loop-through inputs and
double ASI outputs (CW-487X-S2) or IP outputs (CW-497X-S2) by channel. The 8PSK demodulator is based on „Zero IF” technology; the circuitry automatically identifies the FEC, to be entered are only needed the channel frequency and the symbol rate.  The  QPSK demodulator has no controls on its front panel, all settings and programming are made from the computer.

Main features:
•  Four 8PSK demodulators with loop-through inputs for the 950 ... 2150 MHz band
•  Symbol rate between 2 MS/s and 45 MS/s, MCPC and SCPC mode
•  Computation of the C/N value in the 2 ... 18 dB range
•  Direct Conversion technology
•  Common Interface compatible 204 byte/packet format output signal (CI module under design)
•  Computer management system
•  Built-in stream analyzer and picture/sound reproduction
•  19” × 1 HU unit frame, 3.3 V supply voltage, low power consumption, continuous service 

Ordering data:

CW-4871-S2 four independent FTA DVB-S2 demodulators with ASI outputs in 1 HU frame

CW-4872-S2 four independent DVB-S2 demodulators with CIs, CAM analyzers and ASI outputs in 1 HU frame

CW-4971-S2 four independent FTA DVB-S2 demodulators with Gigabit IP output in 1 HU frame

CW-4972-S2 four independent DVB-S2 demodulators with CIs, CAM analyzers and Gigabit IP output in 1 HU frame

CW-4871-S2S one DVB-S2 demodulator with ASI/IP output in 1 HU frame

CW-4872S2-2 one DVB-S2 demodulator with CI, CAM analyzers and ASI/IP output in 1 HU frame