ETR 290 measurement modul in 1.07 PST firmware

The latest software upgrade is available now for the Personal Stream Tool (PST) device. This update (v1.07) contains the following new functions:

- ETR 290 Analyzer module

- DVB-S2X tuner support


Two files have to be uploaded into the device for this upgrade. Firstly, the file for the Gigabit Ethernet Controller must be uploaded (PST GEC II 1.20), after the file for the WEB GUI have to be uploaded (PST WEB GUI 1.07).

Steps for the upgrade are as follows:

1, Select the Expert View mode on the Start Page of the device.

2, Select the Software Upgrade menu item in the Device menu.

3, Press the Browse button at the orange colored "Web Based Software Upgrade" window and select the pst-gec-v1-20.fup file then click on the Start Software Upgrade button. When it is done, refresh the page and select the pst-web-v1-07.fup file and click on the Software Upgrade button.


4, Refresh the web page.

In some cases the previously saved backup files and settings will not be compatible with this new GUI!